| Broadband | Equipment | Support | Contacts | My_Stats |
| Support |
| TCP/IP Settings |
| EMail Settings |
| Settings |
TCPIP We have configured your CPE (Customer Premise Equipment) when we installed your connection. The standard configuration is set to use the following settings 1. Your Public IP Address is assigned to the Radio Card of the CPE 2. Your Private IP Address is provided to you via DHCP, with the following config ............. IP Address in the Range 192.168.1.100 --> 192.168.1.250 ............. Subnet Mask is 255.255.255.0 ............. Default Gateway is 192.168.1.251 ............. Primary DNS is 84.203.210.178 ............. Secondary DNS is 208.67.222.222 3. If you wish to use static IP's please do not use any from the range above 4. The CPE is acting as a firewall, and blocking all access from external users to your network ............. If you require port forwarding from your Public IP to a Private IP, We will port forward to 192.168.1.99 ............. Please contact us to arrange the required ports to be forwarded. 5. We are doing NAT from the Private IP Addresses to your Public IP, So that all connections to the Internet are seen as coming from your Public IP. If you require a Public IP Range on your LAN, You will need to complete a RIPE Application with the reasons why you require the IP's & for these to be accpeted by RIPE. Please contact us to discuss your requirements. Infomation on RIPE's requirements can be found at http://www.ripe.net/ripe/docs/ipv4-policies.html |
|
||
|